Citigrass

Home Improvement

Arghh! Asbestos While Renovating

Are you debating whether to renovate your asbestos if it’s still undamaged? Should you paint or cover it to completely avoid removal? If you are going through with this DIY project, there are a few things you should keep in mind.

asbestos-abatement-Perth-WA

First, you should be knowledgeable about other alternatives of removal of any asbestos containing materials. These may include painting, sealing or covering with a product without asbestos. Secondly, you need to know and comply with all safety regulations when working with asbestos. Lastly, if possible, you should hire a licensed contractor that does Asbestos removal in Perth WA in a safe and professional way.

At all times, you need to keep in mind the people around your workplace such as family and neighbours. Under public safety and health regulations, you need to protect everybody’s health by avoiding the release of asbestos fibers during any project. If possible, speak to your neighbors before engaging in the project. That way, you can explain the necessary safety precautions in place to keep them healthy and safe.

Before performing any renovations on a building, you need to carefully look and prepare accordingly. If you are a homeowner or personal builder, you have the right to remove a maximum of 10 square meters of bonded asbestos without any certification required. Of course, you should meet all the safety precautions. If the amount exceeds the maximum limit, you need the proper certification or hire a certified asbestos removal contractor.

There is no certification necessary for any non-removal work such as drilling holes, preparing surfaces before painting or removing tiles from the bathroom. However, you must follow the asbestos safety precautions by using safety work procedures. When you are removing an asbestos sheet, you should:

• Cordon off the work area, preferably with barrier tape, to prevent unauthorized entry

• Always wear protective clothing and equipment when removing asbestos sheet such as P2 respirator and disposable coveralls.

• Wet the asbestos material before removing it unless doing so would be dangerous, especially on roofs.

• Always avoid breaking or damaging the bonded asbestos before removal. If any damage has occurred, the activities around that area should be kept to a bare minimum.

• Always use plastic drop sheets and wet wipe all the surfaces once you have completed the removal process.

• Proper decontamination is important for all the people involved in the asbestos removal process. This includes wiping any work boots as well as disposing coveralls. Bag all the waste materials in plastic and take showers to remove any dust particles on your skin.

• If possible, all the removal work should always be performed in an open air place or the area should be well-ventilated.

Category: Uncategorized

Your email address will not be published. Required fields are marked *

*